إعلان
OMAINTEC

Sami Abdel Aziz writes: Tunnels

Posted in

Humans have known about building tunnels since ancient times. The oldest railway tunnel in the world is located in England. This tunnel was used to connect limestone quarrying sites to the Cromford Canal using horse-drawn carriages that traveled on iron rails.

Tunnel construction is a branch of civil engineering, and while it shares many basic principles with structural engineering, it differs from it in many ways.

Tunnels can be defined as horizontal passageways built underground that extend between an entrance and an exit that are on the surface of the earth.

The construction of tunnels is an urgent need, especially with urban expansion, and has become even more urgent with the increasing value of time and the remarkable development in means of transportation.

The uses of tunnels are numerous, most notably transportation, mining, water networks, sewage networks, energy facilities, and many other applications.

The development of tunneling methods has become rapid and relies on modern technology. A drilling machine was invented that performs drilling work automatically in a circular motion, where the diameter of the machine is equal to the diameter of the tunnel to be constructed, reaching up to 19 meters.

The machine consists of a circular disc at the front covered with hard, sharp steel cutters that automatically cut and shred the rock as the machine advances. During drilling, this shredded rock enters the machine through openings in the circular disc and is then transported via conveyor belts to the rear, allowing it to be later loaded onto large trucks and taken out of the tunnel.

This machine can be used on all types of rocks, and even on soil, unlike the blasting technology that was used to blast rocks inside mountains. Saudi Arabia used this modern technology to build tunnels in Riyadh, as did Qatar, and Egypt also used it to build tunnels for cars under the Suez Canal.

It must be emphasized that the construction of the tunnel is a dangerous process, and the drilling operations are only one stage of the project. There are many other important things such as securing ventilation, maintenance tunnels, and reinforcement operations that vary from place to place.

Sami Abdul Aziz

Real estate expert

[email protected]